 |
 |
 |
 |
 |
|
|
 |
Printable version
Design Features
Low Profile Carrier
6x6 (all wheel drive), short wheelbase (207"), deluxe aluminum center mount one-man cab, aluminum wheels and fuel tanks (250 gallon fuel capacity).
Feed System (patented)
Powerful direct coupled, hydraulic cylinder driven feed system. Eliminates use of chains, cables, sprockets and sheaves (80,000 lb. pullback/34,000 lb. pulldown).
Drill Rod Storage and Control System (patented)
Totally automated handling, positioning and storage of all drill rod, on board.
Drill/Truck Diesel Power
Single power source with exclusive Versa-Drill power distribution gear box/pump drive, provides direct coupled thru-drive to power rig hydraulics and air compressor.
Air Compressors
Ingersoll-Rand self-contained modules (900/350, 1070/350 or 1250/350), environmentally protected, 145° ambient cooling, lower noise levels.
Casing Handling
Retractable split centralizer table, sliding off hole top-head and swing jib that centers directly over the hole, providing easier handling of up to 20" diameter casing.
back to top
|
|
Mounting
HME custom carrier 6x6 (all wheel drive)
CAT C-18 (630HP)
Power Distribution
Drill/truck single-power source with exclusive Versa-Drill power distribution gearbox/pump drive, provides direct coupled thru-drive to power rig hydraulics and Ingersoll-Rand screw air compressor
Hydraulics
Rotation is a closed loop circuit powered by a variable displacement piston pump
Feed, winch, auxiliary and set-up functions are powered by 4 axial piston load sense pumps
105-gallon reservoir with 10 micron in--tank return filter and 10 micron pressure filters for closed-loop pumps
Air Compressors
900 CFM/350 PSI self-contained module
1070 CFM/350 PSI self-contained module
1250 CFM/350 PSI self-contained module
All compressor modules are direct driven with drive shaft from power distribution box accompanied by hydraulic chassis clutch control (controlled at drill console)
Derrick
12" x 28" tubular derrick construction
35' 6" overall length
26' head travel
(No derrick crown load)
Feed System (patented)
Direct coupled, cylinder driven
Pullback 80,000 lb.
Pulldown 34,000 lb.
Travel Speed:
Up 0 to 180'/min.
Down 0 to 230'/min.
back to top
|
|
Top Head Rotation
Standard high performance 3-speed/torque planetary, spur gear top head
High Torque 8,100 ft.-lb. @ 132 RPM
Mid Torque 6,200 ft.-lb. @ 173 RPM
Low Torque 4,280 ft.-lb. @ 250 RPM
Main Winch & Jib Boom
12,000 lb. (standard) hydraulic powered main winch, includes hydraulic jib boom with 180° radius swing and 40" extension 18,000 lb. main winch (optional)
Rope Capacity 220' of 5/8" rotation resistant cable
Lift Capacity 12,000 lb. single line (bare drum), 18,000 lb. (optional)
Speed 104'/min. (bare drum)
Control Panel
User friendly electro/hydraulic controls with functionally grouped gauges and twin fold-up aluminum platforms
Leveling Jacks
2 mid-mounted 48" stroke jacks (behind cab) and
2 rear-mounted 36" stroke leveling jacks with independent controls
Centralizer
Retractable hydraulic split centralizer table including hydraulic breakout wrench and air operated holding wrench. Table opening will accommodate up to 20" casing
Automated Drill Rod Storage & Handling System (patented)
Automated drill rod storage and control system
stores and positions 25 pieces (500') of
4 1/2" x 20' drill rod |
|
Overall Length
35' 6"
Overall Height
Derrick up - 42'
Derrick up w/tophead at full stroke - 61' 6"
Derrick down - 12' 4"
Overall Width
102"
Casing Stinger Assembly
Provides the ability to handle a maximum 40,000 lbs. of Range III casing
Auxiliary Hoists
Up to 8,000 lb. auxiliary hydraulic winch with swing jib and optional freefall
DHD Lubricator
7-gallon capacity (electric)
Water Injection
a. *FMC Bean pump w/25 GPM capacity
b. *CAT w/25 GPM capacity
*Optional foam pulse pump (available)
Mud Pumps*
Mission 3x4 centrifugal w/mechanical seal
(300 GPM/230 PSI)
*Rig or skid-mounted
Night Lighting System
9 halogen lights functionally mounted on drill rig
Hammer Holder(s)*
a. 6" Hammer holder
b. 8" Hammer holder
c. 10" Hammer holder
d. 12" Hammer holder
*Any combination of, no more than 3
Stabilizer Chute
Up to 9" x 15' stabilizer chute mounted on rig
|
|
Model
HME Custom carrier 6x6 (All wheel drive)
Wheelbase
207"
GVWR
69,000 lb.
Front Axle Suspension
Axle Rating 23,000 lb.
Suspension 23,000 lb. leaf
Rear Axle Suspension
Axle Rating 46,000 lb. tandems
suspension 46,000 lb. spring-mounted walking beam
*Driver controlled locking axles
Engine
CAT C-18 (630 HP)
Transmission
Manual, 10-speed
Frame
12 5/8" x 3/8" x 3 1/4"
11 7/8" x 5/16" x 2 7/8" C-channel
Brakes
Air brake system with anti-lock brakes
Clutch
Eaton self-adjusting clutch
Fuel Tank Capacity
250 gallons (total)
Other Specifications
Alcoa aluminum wheels
Aluminum fuel tanks
Brushed aluminum mirrors
Power steering
Power brakes
Jacobs engine brake
AM/FM radio w/CD player
Air conditioning
Diesel fired engine heater
Water preheater
|
|
back to top
|
 
 
 
|
|
1414 Bates Street • Indianapolis, IN 46201 U.S.A.
Telephone: (317) 231-2250 • Fax: (317) 266-8426
Toll Free: (800) 942-3388 •
sales@laibecorp.com
|
|
|
