 |
 |
 |
 |
 |
|
|
|
Printable version
Design Features
Deck Engine Power
Powerful CAT C15 engine boasts 540 horsepower at 2,100 RPM, with dedicated 150-gallon fuel tank (includes fuel cooler).
Feed System (patented)
Hydraulic cylinder/driving gear track provides tremendous power (40,000 lbs. pullback) and eliminates use of chains, cables, sprockets and sheaves.
Tubular Derrick
The 10" x 16" tubular derrick construction is considerably lighter weight than traditional lattice-type derricks, while providing superior strength.
Derrick Carousel
The hydraulic, derrick-mounted carousel holds 15 pieces of 3 1/2" x 20' standard or 12 pieces of 4 1/2" x 20' drill rod, ensuring safe and rapid handling.
Split Centralizer Table
Centralizer base plate is split; rear half swings out and the front section retracts, accommodating up to 16" casing.
back to top
|
|
Mounting
CAT 315L Steel Tracks (hydraulic powered) with
Standard Wireless Remote Control Drive Capability
Deck Engine Power Pack
CAT C15 (540 HP) @ 2,100 RPM with dedicated 150 gallon
fuel tank (includes fuel cooler)
Combination Compressor Clutch/Pump Drive Box
Air compressor clutch engage/disengage (manually operated) and hydraulic pump gear box
Hydraulics
Fast feed, winch, auxiliary and set-up functions are powered by 2 axial piston pressure compensated pumps
Rotation is a closed loop circuit, powered by a variable displacement piston pump with variable displacement
axial piston motors
Deck engine and compressor cooling is powered by an axial piston pressure compensated pump
Derrick
10"x16" tubular construction
34' overall length
Standard 26' overall head travel
55,000 lbs. rating
Feed System (patented)
Hydraulic cylinder driving gear track
Pullback 40,000 lbs.
Pulldown 18,000 lbs.
Three Speed Top Head
2 motor combination planetary/spur gear, 3 speed/torques
High Torque 8,100 ft.-lbs. @ 132 RPM
Med Torque 6,200 ft.-lbs. @ 173 RPM
Low Torque 4,280 ft.-lbs. @ 250 RPM
back to top
|
|
Main Winch & Jib Boom
Hydraulic power with integral brake
Rope Capacity 220' of 5/8" cable
Lift Capacity 12,000 lbs. single line (bare drum)
18,000 lbs. (optional)
Speed 104'/min. (32m/min) (bare drum)
Controls
Left hand mounted panel with functionally grouped gauges
and controls with twin fold-up platforms
Leveling Jacks
2 mid-mounted 48" stroke leveling jacks (behind cab) and
2 rear-mounted 36" stroke leveling jacks with independent
controls (standard)
Centralizer
Swing out rear section, retracting front section,
dual cylinder, will accommodate up to 16" casing
Carousels (select one)
Capacity for 15 pcs. of 3 1/2" OD x 20' drill rod
Capacity for 12 pcs. of 4 1/2" OD x 20' drill rod
Rod Box
Holds 20 pieces of 3 1/2" x 20' OD drill rod
or
Holds 12 pieces of 4 1/2" x 20' OD drill rod
Tool Boxes
a. 12" x 12" x 32"
b. 12" x 12" x 24"
c. 24" x 26" x 42"
Night Lighting System (standard)
8 halogen lights mounted on derrick and above control panel
Deck Engine Pre-Heater (standard)
PROHEAT (model)
Catwalk (standard)
24" aluminum catwalk on rod box side of rig
|
|
Main Hoist
18,000 lbs. single line (bare drum)
Auxiliary Hoist
Rated for 2,000 lbs. OR 8,000 lbs. with swing jib and 1 additional halogen night light
DHD Lubricator
7-gallon capacity electric operated
Water Injection
a. FMC Bean pump w/9 GPM capacity
b. FMC Bean pump w/25 GPM capacity
Mud Pumps
a. Mission 3x4 centrifugal w/mechanical seal
(300 GPM/230 PSI)
Stabilizer Chute
15" stabilizer chute mounted on outside of rod box
Hammer Holder(s)
Single or dual hammer holder (maximum 9" diameter each)
Extended CAT C15
Limited warranty: 5 year/6,000 hours (additional charge)
back to top
|
|
Overall Length
35'
Overall Height
Derrick up - 39' 7 "
Derrick up w/tophead at full stroke - 47' 10"
Derrick down - 12' 4 "
Overall Width
8'
Weight
52,000 lbs. (less tools)
|
 
 
|
|
1414 Bates Street • Indianapolis, IN 46201 U.S.A.
Telephone: (317) 231-2250 • Fax: (317) 266-8426
Toll Free: (800) 942-3388 •
sales@laibecorp.com
|
|
|
