 |
 |
 |
 |
 |
|
|
|
Printable version
Design Features
Deck Engine Power
Powerful CAT C15 engine boasts 540 horsepower at 2,100 RPM, with dedicated 150-gallon fuel tank (includes fuel cooler).
Air Compressor Module with Clutch
Ingersoll-Rand HR2 900/350 self-contained air compressor module with 140° ambient cooling, includes engine/compressor manual clutch engage/disengage.
Feed System (patented)
Hydraulic cylinder/driving gear track provides tremendous power (40,000 lbs. pullback) and eliminates use of chains, cables, sprockets and sheaves.
Tubular Derrick
The 10" x 16" tubular derrick construction is considerably lighter weight than traditional lattice-type derricks, while providing superior strength.
Derrick Carousel
The hydraulic, derrick-mounted carousel holds 10 pieces of 3 1/2" x 20' or 7 pieces of 4 1/2" x 20' drill rod, ensuring safe and rapid handling.
Split Centralizer Table
Centralizer base plate is split; rear half swings out and the front section retracts, accommodating up to 16" casing.
back to top
|
|
Mounting
Peterbilt Model 335 6x4 chassis
GVWR 64,000 lbs.
CAT C7 (330 HP)
Deck Engine Power Pack
CAT C15 (540 HP) @ 2,100 RPM with dedicated 150 gallon
fuel tank (includes fuel cooler)
Combination Compressor Clutch/Pump Drive Box
Air compressor clutch engage/disengage (manually operated) and hydraulic pump gear box
Hydraulics
Fast feed, winch, auxiliary and set-up functions are powered by 2 axial piston pressure compensated pumps
Rotation is a closed loop circuit, powered by a variable displacement piston pump with variable displacement axial piston motors
Deck engine and compressor cooling is powered by an axial piston pressure conpensated pump
Air Compressor
Standard:
900 CFM/350 PSI
self-contained module
Optional:
1070 CFM/350 PSI
self-contained module
All compressor modules have 140° ambient cooling and are direct driven with drive shaft from Combination Compressor Clutch (manually operated)/Pump Drive Box
Derrick
10"x16" tubular construction
34' overall length
Standard 26' overall head travel
55,000 lbs. rating
Feed System (patented)
Hydraulic cylinder driving gear track
Pullback 40,000 lbs.
Pulldown 18,000 lbs.
back to top
|
|
Top Head Rotation
2 motor spur gear
Sliding top head drive
0-116 RPM/75,000 in.-lbs. (6,250 ft.-lbs.) torque
Main Winch & Jib Boom
Hydraulic power with integral brake
Rope Capacity 220' of 5/8" cable
Lift Capacity 12,000 lbs. single line (bare drum)
18,000 lbs. (optional)
Speed 104'/min. (32m/min) (bare drum)
Controls
Left hand mounted panel with functionally grouped gauges
and controls with twin fold-up platforms
Leveling Jacks
2 mid-mounted 36" stroke leveling jacks (behind cab) and
2 rear-mounted 36" stroke leveling jacks with independent
controls (standard)
Centralizer
Swing out rear section, retracting front section,
dual cylinder, will accommodate up to 16" casing
Carousel
Hydraulic powered, derrick-mounted carousel with
holding flats for make up and break out purposes
Capacity for 10 pieces of 3 1/2" OD x 20' drill rod
Capacity for 7 pieces of 4 1/2" OD x 20' drill rod
Rod Box
Holds 20 pieces of 3 1/2" x 20' OD drill rod
or
Holds 12 pieces of 4 1/2" x 20' OD drill rod
Tool Boxes
a. 12" x 12" x 32"
b. 12" x 12" x 24"
c. 24" x 26" x 42"
|
|
Overall Length
35'
Overall Height
Derrick up - 39' 8"
Derrick up w/tophead at full stroke - 47' 11"
Derrick down - 12' 5"
Overall Width
8'
Weight
46,000 lbs. (less tools)
Three Speed Top Head
2 motor combination planetary/spur gear, 3 speed/torques
High Torque 8,100 ft.-lbs. @ 132 RPM
Med Torque 6,200 ft.-lbs. @ 173 RPM
Low Torque 4,280 ft.-lbs. @ 250 RPM
Larger Carousels*
Capacity for 15 pcs. of 3 1/2" OD x 20' drill rod
Capacity for 12 pcs. of 4 1/2" OD x 20' drill rod
*Changes conventional holding and top break-out method
*Reduces size and capacity of rod box
Leveling Jacks
2 mid-mounted 48" stroke leveling jacks (behind cab)
Main Hoist
18,000 lbs. single line (bare drum)
Auxiliary Hoist
Rated for 2,000 lbs. OR 8,000 lbs. with swing jib and 1 additional halogen night light
DHD Lubricator
7-gallon capacity electric operated
Water Injection
a. FMC Bean pump w/9 GPM capacity
b. FMC Bean pump w/25 GPM capacity
Mud Pumps
a. Mission 3x4 centrifugal w/mechanical seal
(300 GPM/230 PSI)
b. Gardner Denver 5x6 piston-type mud pump
(200 GPM/300 PSI)*
* Requires special order truck with longer wheel base and installation behind the cab
Night Lighting System
4 halogen lights mounted on derrick and above control panel
Stabilizer Chute
15" stabilizer chute mounted on outside of rod box
Hammer Holder(s)
Single or dual hammer holder (maximum 9" diameter each)
Deck Engine Pre-Heater
PROHEAT (model)
Extended CAT C15
Limited warranty: 5 year/6,000 hours (additional charge)
back to top
|
|
Model
Peterbuilt Model 335 6x4 chasis
Wheelbase
232"
Cab-to-Axle
163"
GVWR
64,000 lbs.
Axles and Suspension
Front Axle Rating 18,000 lbs.
Front Suspension 18,000 lbs. leaf
Rear Axle Rating 46,000 lbs. tandem*
Rear Suspension 46,000 lbs. Haulmax (HMX 460)
*Driver controlled full locking rear axles
Engine
Cat C7 330HP
(Jacobs Engine Brake - not available)
Transmission
Manual, FULLER RT011908LL 10-speed
Frame
110,000 PSI (758.5 MPa) 10 5/8"
frame rail with full liner
Brakes
Air brake system with anti-lock brakes
Clutch
14" diameter ceramic
Fuel Tank Capacity
50-gallons (for truck use only)
Other Specifications
Brushed aluminum mirrors
Cruise control
Power steering
Power brakes
Block heater
AM/FM radio
Air conditioning
|
 
 
 
|
|
1414 Bates Street • Indianapolis, IN 46201 U.S.A.
Telephone: (317) 231-2250 • Fax: (317) 266-8426
Toll Free: (800) 942-3388 •
sales@laibecorp.com
|
|
|
