 |
 |
 |
 |
 |
|
|
|
Printable version
Design Features
Tubular Derrick
The 10"x16" tubular derrick construction is considerably lighter weight than traditional lattice-type derricks, while providing superior strength.
Feed System (patented)
Hydraulic cylinder/sliding gear track design, provides tremendous power (40,000 lbs. pullback), requiring less maintenance than conventional system with chains and sprockets or cables and sheaves.
Top Head Drive
A variable 2-speed/torque, floating head provides smooth operation and helps the operator recognize specific formations while drilling. Top head hydraulically slides to the side, (off-hole) for convenience of setting casing.
Derrick Carousel
The hydraulic rotating carousel holds 10 pieces of 3 1/2" x 20' or 11 pieces of 3 1/2" x 20' drill rod ensuring safe and rapid handling.
Split Centralizer Table
Centralizer base plate is split in half, rear half retracts hydraulically, and the front half swings out to accommodate casing and tools. Also includes an air-operated drill pipe holding wrench and hydraulic breakout wrench.
Hydraulic Swing Jibs
A standard 12,000 lbs. main winch and jib and an optional 2,000 lbs. auxiliary winch and jib, both position over the hole or swing to side for efficient casing and tool handling.
back to top
|
|
Mounting
Peterbilt Model 335 6x6 (all wheel drive) chassis
GVWR 54,600 lbs.
Cat C7 (300HP)
Transfer Case
Single output, full power transfer case road/PTO shift from truck cab
Hydraulics
Mounted on 2 hole gear box, truck engine/transfer case powered
Feed, winch, auxiliary and set-up functions are powered by 2 axial piston load sense pumps
Rotation is a closed loop circuit powered by a variable displacement piston pump
Air Compressor
300 CFM/200 PSI self-contained module
or
500 CFM/200 PSI self-contained module
Cooling
Hydraulic oil cooler mounted on deck and compressor cooler mounted in cabinet with compressor
Derrick
10"x16" tubular derrick construction
35' 10" overall length
26' top head travel
55,000 lbs. rating
(No derrick crown load)
Feed System (patented)
Cylinder feed through gear track design
Pullback 40,000 lbs.
Pulldown 18,000 lbs.
Travel Speed Up 0 to 145'/min.
Down 0 to 261'/min.
Drill Feed 29'/min.
back to top
|
|
Top Head Rotation
2 motor combination planetary/spur gear
2 speeds/torques
0 to 172 rpm, 52,000" lbs. torque
0 to 230 rpm, 39,000" lbs. torque
Main Winch & Jib Boom
Hydraulic power with integral brake
Rope Capacity 220' of 5/8" cable
Lift Capacity 12,000 lbs. single line (bare drum)
Speed 104'/min. (bare drum)
Jib Boom
Hydraulic swing/extend for main hoist line
Controls
Left hand mounted, functionally grouped gauges and controls w/twin fold-up platforms
Leveling Jacks
2 front-mounted 36" stroke leveling jacks and
2 rear-mounted 36" stroke leveling jacks with
independent controls
Centralizer
Retracting hydraulic split centralizer table including hydraulic breakout wrench and air operated holding wrench
Carousel
Hydraulic powered, derrick-mounted carousel with holding flats for make up and break out purposes
Capacity for 10 pieces of 3 1/2" OD x 20' drill rod
Capacity for 11 pieces of 3" OD x 20' drill rod
Rod Box
Holds 20 pieces of 3 1/2" or 3" OD x 20' drill rod
|
|
Overall Length
35' 10"
Overall Height
Derrick up - 40'
Derrick down - 12' 6"
Overall Width
8'
(at additional cost)
Larger Carousel*
Capacity for 15 pcs. of 3 1/2" OD x 20' drill rod
*Changes conventional holding and top break-out method
*Reduces size and capacity of rod box
Auxiliary Hoist
Rated for 2,000 lbs. with swing jib and 1 additional halogen night light
Main Winch
18,000 lbs.
DHD Lubricator
7-gallon capacity
Water Injection
a. FMC Bean pump w/9 GPM capacity
b. FMC Bean pump w/25 GPM capacity
Mud Pumps*
a. 3x4 centrifugal w/mechanical seal
(300 GPM/230 PSI)
b. 5x6 piston-type hydraulic driven
(200 GPM/300 PSI)
Grout Pump Assembly
a. Standard 1 1/2" Bowie pump mounted inside of deck
b. 2" Bowie pump
c. 3L4 Moyno pump
d. 3L6 Moyno pump
Night Lighting System
3 halogen lights mounted on derrick and above control panel
Hose Reels
Manual 1.18" hose O.D. (cap. 175')
Tool Boxes
a. Large tool box under deck
b. Tool box mounted on deck under rod box
c. Tool box mounted on deck behind right side of cab
d. Tool box mounted under or in front of rod box
e. Tool box mounted behind right rear jack
f. Extra tool box beside large tool box
back to top
|
|
Model
Peterbuilt Model 335 6x6
(all wheel drive)
Wheelbase
214"
Cab-to-Axle
143"
GVWR
54,600 lbs.
Axles and Suspension
Front Axle Rating 14,600 lbs.
Front Suspension 14,600 lbs. leaf
Rear Axle Rating 40,000 lbs. tandem*
Rear Suspension 40,000 lbs. Haulmax (HMX 400)
*Driver controlled full locking axles
Engine
Cat C7 330HP
Transmission
Manual, 10-speed
Brakes
Air brake system with anti-lock brakes included
Clutch
2 plate 14" diameter ceramic clutch
Fuel Tank Capacity
100-gallon total
Other Specifications
Brushed aluminum mirrors
Cruise control
Power steering
Power brakes
Block heater
AM/FM radio
Air conditioning |
 
 
 
|
|
1414 Bates Street • Indianapolis, IN 46201 U.S.A.
Telephone: (317) 231-2250 • Fax: (317) 266-8426
Toll Free: (800) 942-3388 •
sales@laibecorp.com
|
|
|
